K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
15. Position the heater inlet hose clamp at the water pump.
16. Remove the heater inlet hose from the water pump.
17. Remove the water pump bolts.
18. Remove the water pump and gaskets.
19. Discard the water pump gaskets.
Installation Procedure
Important: All gaskets surfaces are to be free of oil or other foreign material during assembly.
1. Install the water pump and NEW gaskets.
Notice: Refer to Fastener Notice in Service Precautions. See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the water pump bolts.
