K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
1. Install the power steering cooler (1) to the radiator support.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts retaining the power steering cooler to 5 N.m (44 lb in).
2. Install the power steering cooler outlet hose (3) to the power steering pump (2).
3. Install the retaining clamp.
4. Install the power steering inlet hose (5) to the power steering gear (1).
5. Install the retaining clamp.
6. Fill and bleed the power steering system. Refer to Bleeding the Power Steering System.
7. Inspect all the hose connections for leaks.
8. Install the front grille.
