K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
5. Remove the EVAP purge solenoid (3) and insulator (1).
INSTALLATION PROCEDURE
1. Install the insulator (1) onto the EVAP canister purge solenoid (3).
2. Install the EVAP canister purge solenoid (3).
NOTE: Refer to Fastener Notice in Service Precautions See: Service Precautions/Vehicle Damage Warnings/Fastener Notice.
3. Install the EVAP canister purge solenoid bolt (2).
Tighten
Tighten the bolt to ...........................10.5 N.m (93 lb in).
4. Connect the EVAP purge solenoid electrical connector (1).
5. Install the EVAP tube to the purge solenoid (1).