K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
5. Firmly seat the retaining ring (3) into the groove on the steering shaft assembly (2).
6. Remove and discard the centering tab from the new SIR coil (4).
7. Install the upper shroud (1) and secure by using 2 TORX(R) head screws (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the screws to 1.5 N.m (13 lb in).
8. Install the lower shroud (2) and secure by using 2 TORX(R) head screws (1).
9. Verify that the tabs on the lower shroud (1) engage with the tabs on the upper shroud (2). Snap the tabs together.
