K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
1. Install the lower right air temperature sensor (1).
2. Connect the electrical connector to the lower right air temperature sensor (1).
3. Install the center console.
4. Install the right floor duct.
5. Install the I/P lower closeout panel.
Air Temperature Sensor Replacement - Upper Auxiliary
REMOVAL PROCEDURE
1. Remove the right side C-pillar trim panel.
2. Disconnect the electrical connector from the rear upper A/C temperature sensor (11).
3. Remove the rear upper A/C temperature sensor (11) from the air distribution duct.
INSTALLATION PROCEDURE
