gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 5107 > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 5105

K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)

Page 1
background image

Manifold Absolute Pressure (MAP) Sensor: Service and Repair

MANIFOLD ABSOLUTE PRESSURE (MAP) SENSOR REPLACEMENT

REMOVAL PROCEDURE

1. Remove the engine sight shield.
2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector (1).

3. Remove the MAP sensor (1).

INSTALLATION PROCEDURE

IMPORTANT:Lightly coat the MAP sensor seal with clean engine oil before installing the sensor.

1. Install the MAP sensor (1).

Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 5107 > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 5105