K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
1. Install the front speed sensor.
Tighten the speed sensor to 15 Nm (11 ft. lbs.).
2. Connect the front speed sensor electrical connector (5).
3. Install the transfer case shield, if equipped.
Transfer Case Speed Sensor Replacement - Left Rear
Transfer Case Speed Sensor Replacement - Left Rear
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the left rear speed sensor electrical connector (4).
