K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
Control Arm: Service and Repair
Rear Suspension
Rear Axle Upper Control Arm Replacement
REAR AXLE UPPER CONTROL ARM REPLACEMENT
REMOVAL PROCEDURE
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the electronic suspension control (ESC) sensor, if equipped.
3. Remove the upper control arm retaining nut and bolt from the frame bracket.
4. Remove the upper control arm retaining nut and bolt from the axle bracket.
5. Remove the upper control arm.
INSTALLATION PROCEDURE
1. Install the upper control arm.
