K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
IMPORTANT: Note the position of the torsion bars as the left and right bars are different.
INSTALLATION PROCEDURE
1. Install the torsion bars to the lower control arm.
2. Install the torsion bar crossmember.
3. Install the torsion bar crossmember bolts (1) to the weld nuts (4).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolt to 95 N.m (70 lb ft).
