K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
4. Remove the retainer that secures the cable to the bracket.
5. Depress the tangs and remove the cable from the bracket.
6. Remove the bolts (1) securing the transmission range selector cable bracket (2) to the transmission.
7. Remove the transmission range selector cable bracket.
Installation Procedure
1. Install the transmission range selector cable bracket.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
2. Install the transmission range selector cable bracket bolts (1).
-
Tighten the bolts to 25 Nm (18 ft. lbs.).
