K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
1. Verify all primers and urethane adhesive are within expiration dates.
CAUTION: Refer to Window Retention Caution in Service Precautions.
2. Use a new dauber in order to apply glass prep, clear #1, to the channel area approximately 13 mm (1/2 in) to the upper edge of the window.
IMPORTANT: Use care when applying the prep, clear #1, to the window. This primer dries almost instantly, and may stain the viewing area of the
window if not applied evenly.
3. Wipe the glass primed area immediately with a clean lint-free cloth.
4. Shake the glass primer, black #2, for at least 1 minute.
5. Use a new dauber in order to apply glass primer, black #2, to the top edge of the window.
6. Apply a small bead of urethane adhesive (2) between the window (1) and the pinch-weld.
7. Reinstall the window reveal molding.
7.1.
Start from the loose area and hand-press the reveal molding into place over the edge of the window.
7.2.
Run warm water over the reveal molding in order to speed the setup time of the urethane adhesive.
