K 1500 Yukon 4WD V8-5.3L VIN Z Flex Fuel (2003)
5. Using a wide plastic flat-bladed tool, release the retaining clips on both sides of the door module.
6. Remove the door module from the switch panel bezel.
INSTALLATION PROCEDURE
1. Install the door module into the switch panel bezel until it snaps into place.
2. Install the switch panel bezel and module to the door panel.
3. Install the screw that retains the switch panel bezel (1) to the front door panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
