gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Bezel Replacement|Page 12865 > < Bezel Replacement|Page 12863
Page 3
background image

Tighten the trim panel screws to 2 N.m (18 lb in).

7. Install the manual lock lever to the trim panel.
8. Install the upper extension of the trim panel.
9. Install the door handle bezel.

Trim Panel Replacement - Upper Extension

REMOVAL PROCEDURE

1. Open the front door.
2. Release the upper extension by pulling outward in order to release the upper retainer clip.
3. Remove the upper extension from the trim panel by lifting up and out.

INSTALLATION PROCEDURE

1. Position the lower retainer to the trim panel.
2. Align the upper retainer clip to the door frame.
3. Install the upper extension by pressing into place until fully seated.

Bezel Replacement|Page 12865 > < Bezel Replacement|Page 12863