K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Cargo Cover: Service and Repair
CARGO COVER COMPRESSION LATCH REPLACEMENT
REMOVAL PROCEDURE
1. Lower the end gate.
2. Remove the cargo cover assembly from the vehicle.
3. Remove the latch fastener.
4. Remove the latch from the cargo cover.
INSTALLATION PROCEDURE
1. Install the latch to the cargo cover.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the fasteners to the latch.
Tighten
Tighten the fasteners to 6 N.m (53 lb in).
3. Install the rear compartment cover assembly to the vehicle.
