gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Interior Moulding / Trim|Console > < Procedures|Page 13213
Page 3
background image

Notice:  Refer to Fastener Notice in Service Precautions.

3. Install the bolts that retain the cargo tie down hooks to the floor.

Tighten the bolts to 35 N.m (26 lb ft).

4. Install the endgate or the liftgate door sill trim plate.
5. Install the trim panels for the rear quarter.
6. Install the door sill trim plates.
7. Install the second rear seat if equipped.
8. Install the rear seat.

Interior Moulding / Trim|Console > < Procedures|Page 13213