K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
3. Remove the cargo box bridge center screws (1,2).
4. Disconnect the electrical connector.
5. Remove the panel assembly from the vehicle.
6. Remove the high mount stop lamp from the cargo bridge center.
Installation Procedure
1. Install the high mounted stop lamp to the cargo box bridge center.
2. Connect the electrical connector.
3. Install the panel assembly to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the panel assembly screws (1,2).
Tighten the panel assembly screws (1,2) to 7 N.m (62 lb in).
5. Inspect the operation.
6. Install the rear compartment cover assembly.
Panel Replacement - Removable Rear - Mid Gate
REMOVAL PROCEDURE
