K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
1. Ensure the seat is in the full upward position.
2. Remove the screws retaining the seat back release handle and the seat recliner handle and remove the handles.
3. Remove the remaining screws retaining the trim panel to the seat.
4. Remove the trim panel from the seat.
INSTALLATION PROCEDURE
1. Position the trim panel on the seat.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the screws retaining the trim panel to the seat.
Tighten
Tighten the screws to 2 N.m (18 lb in).
3. Install the remaining screws retaining the seat back release handle and the seat recliner handle to the seat.
Tighten
Tighten the screws to 2 N.m (18 lb in).
Trim Panel Replacement - Hinge Pillar
Trim Panel Replacement - Hinge Pillar
Removal Procedure