K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Power Seat Motor: Service and Repair
Seat Adjuster Replacement - Front (Manual)
Seat Adjuster Replacement - Front (Manual)
Removal Procedure
1. Remove the front seat from the vehicle.
2. Remove the seat trim panel.
3. Remove the seat cushion frame.
4. Remove the seat back frame.
5. Remove the seat back hinge/recliner mechanism.
6. Remove the seat adjuster track cover.
7. Remove the inboard seat belt buckle and nut (1).
Disconnect the electrical connection (2).
8. Remove the bar (1) from the adjuster tracks (2). Straighten the tabs in order to remove the bar.
9. Remove the cross brace (3).
10. Remove the EZ entry rod (4), if equipped with the EZ entry feature.
11. Remove the cushion tilt mechanism, if equipped.
Installation Procedure
1. Install the cushion tilt mechanism, if equipped.
2. Install the EZ entry rod (4), if equipped with the EZ entry feature.
3. Install the cross brace (3).
4. Install the bar (1) onto the racks (2). Bend the tabs in order to secure the bar.
