K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
5. Use care not to twist the ribbon.
6. Turn the cruise control cable at the engine-end fitting in order to straighten the cruise control module ribbon, as needed.
Ensure that the ribbon is flat and vertical.
7. Slide the cruise control cable conduit over the ribbon.
^
Install the tangs to the cruise control module housing.
^
Ensure that the tangs snap securely into place.
8. Snap the cruise control cable engine-end fitting over the stud on the throttle lever.
9. Connect the cruise control cable conduit fitting to the engine cable bracket.
^
Ensure that the tabs snap securely into the hole.
^
Route the cruise control cable above the accelerator cable.
