K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
15. Reposition the heater inlet hose clamp at the water pump.
16. Remove the heater inlet hose from the water pump.
17. Remove the water pump bolts.
18. Remove the water pump and gaskets.
19. Discard the water pump gaskets.
Installation Procedure
Important: All gaskets surfaces are to be free of oil or other foreign material during assembly.
1. Install the water pump and NEW gaskets.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the water pump bolts. Tighten
2.1.
Tighten the water pump bolts a first pass to 15 Nm (11 ft. lbs.).
2.2.
Tighten the water pump bolts a final pass to 30 Nm (22 ft. lbs.).
