K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Engine Mount: Service and Repair
Engine Mount Replacement - Left
Engine Mount Replacement- Left
Removal Procedure
Notice: When raising or supporting the engine for any reason, do not use a jack under the oil pan, any sheet metal, or the crankshaft pulley. Due to
the small clearance between the oil pan and the oil pump screen, jacking against the oil pan may cause the pan to be bent against the pump screen.
This will result in a damaged oil pickup unit.
1. Remove the engine mount-to-engine mount bracket bolts. (Right side shown, left side similar).
2. If vehicle is a 2 wheel drive (2WD), raise the vehicle to a height to work through the front wheelhouse opening.
3. If vehicle is a 4 wheel drive (4WD), raise the vehicle in order to remove the front tires and wheels.
4. Remove the left front tire and wheel.
5. Remove the wheelhouse inner panel push pin retainers (2).
6. Remove the wheelhouse inner panel (1).
