K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount bolts.
-
Tighten the engine mount bolts to 50 Nm (37 ft. lbs.).
3. Lower the engine.
4. Remove the adjustable jack stands.
5. Install the front propeller shaft.
6. Position the engine shield to the vehicle.
7. Install the engine shield bolts.
-
Tighten the engine shield bolts to 20 Nm (15 ft. lbs.).
8. Lower the vehicle.
9. Install the left front tire and wheel.
10. Install the wheelhouse inner panel push pin retainers (2).
11. Install the wheelhouse inner panel (1).
