K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
2. If equipped with a 6.0L engine, perform the following:
2.1.
Install the oil cooler hose assembly and a new gasket.
2.2.
Install the oil cooler hose adapter bolts (2).
-
Tighten the bolts to 12 Nm (106 inch lbs.).
2.3.
Install the oil cooler hose bracket bolt (1).
-
Tighten the bolt to 25 Nm (18 ft. lbs.).
3. If equipped, install the engine shield.
4. Install the engine shield bolts.
-
Tighten the bolts to 20 Nm (15 ft. lbs.).
5. Do not install the new retaining clip onto the fitting by pushing on the clip.
