K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the sight shield retainer and the bolts, if required.
-
Tighten the retainer bolts to 5 Nm (44 inch lbs.).
2. Install the cruise control cable clip to the retainer.
3. Install the accelerator control cable clip to the retainer.
Notice: Use care when installing the engine sight shield to avoid contacting the manifold absolute pressure (MAP) sensor wire harness connector.
Loss of engine performance or engine damage may result.
4. Install the intake manifold sight shield to the retainer.
-
Tighten the bolt to 10 Nm (89 inch lbs.).
