K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
3. Install the crankshaft front oil seal onto the J 41478 guide.
4. Install the J 41478 threaded rod (with nut, washer, guide, and oil seal) into the end of the crankshaft.
5. Use the J41478 in order to install the oil seal into the cover bore.
5.1.
Use a wrench and hold the hex on the installer bolt.
5.2.
Use a second wrench and rotate the installer nut clockwise until the seal bottoms in the cover bore.
5.3.
Remove the J41478.
5.4.
Inspect the oil seal for proper installation. The oil seal should be installed evenly and completely into the front cover bore.
6. Install the crankshaft balancer.
