K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
1. Apply sealant GM U.S. P/N 12346004, Canada P/N 10953480, or equivalent, to the threads of the oil pressure sensor.
Notice: Refer to Fastener Notice in Service Precautions.
2. Using J 41712 or equivalent, install the oil pressure sensor.
-
Tighten the oil pressure sensor to 20 Nm (15 ft. lbs.).
3. Connect the oil pressure sensor electrical connector (1).
4. If necessary, install the engine sight shield.
