K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Exhaust Manifold: Service and Repair
Exhaust Manifold Replacement - Right
Exhaust Manifold Replacement - Right (4.8L, 5.3L, and 6.01- Engines)
1. Remove the ignition coils. Refer to Ignition Coil(s) Replacement in Engine Controls - 4.8L, 5.3L, and 6.OL.
2. Remove the spark plugs. Refer to Spark Plug Replacement in Engine Controls - 4.8L, 5.3L, and 6.OL.
3. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
4. Remove the exhaust manifold pipe nuts.
5. Lower the vehicle.
6. If equipped, remove the bolts (1, 2, and 3) attaching the exhaust gas recirculation (EGR) valve pipe to the following:
-
Intake manifold
-
Cylinder head
-
Exhaust manifold
7. Remove the EGR valve pipe and gaskets, if equipped.
With mild force, pull the EGR valve pipe from the intake manifold.
8. Remove the O-ring seal from the EGR valve pipe, if equipped.
9. Discard the gasket and the O-ring seal.
