K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
14. Connect the oxygen sensor electrical connector.
15. Connect the CPA retainer.
16. Clip the oxygen sensor connector to the support.
17. Connect the oxygen sensor electrical connector.
18. Connect the CPA retainer.
19. Clip the oxygen sensor connector to the frame.
20. Raise the rear axle using the adjustable jack stands.
21. Install the rear shock absorbers lower bolts and nuts.
-
Tighten the lower bolts to 95 Nm (70 ft. lbs.).
22. Remove the adjustable jack stands from under the rear axle.
