K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
1. Install the air temperature actuator (1) to the rear HVAC module.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the air temperature actuator retaining screws.
Tighten
Tighten the screws to 1.6 N.m (14 lb in).
3. Connect the electrical connector to the air temperature actuator.
4. Install the right rear quarter trim panel.
Mode Actuator Replacement
REMOVAL PROCEDURE
1. Remove the floor air outlet duct extension (1) from the floor duct (2).