K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Console Lamp: Service and Repair
REMOVAL PROCEDURE
IMPORTANT: Do not disconnect the electrical connectors.
1. Remove and move the console end panel rearwards.
2. Press on the tabs (1) in order to remove the lamp assembly from the end panel.
3. Disconnect the electrical connector.
4. To replace the bulb, turn counter clockwise to remove.
INSTALLATION PROCEDURE
1. Install the bulb by turning clockwise.
2. Connect the electrical connector to the lamp.
3. Push in the lamp assembly until the tabs (1) are fully seated.
4. Install the console end panel.
