K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Fluid - Transfer Case: Service and Repair
NVG 149-NP (One Speed Automatic)
Transfer Case Fluid Replacement
Removal Procedure
Important: When performing the following service procedures, use only hand tools to remove and install the fill or drain plugs.
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the transfer case shields from the cross member (if equipped).
3. Remove the fill plug from the transfer case.
Important: When draining the transfer case, make sure that an approved drain pan is used.
4. Remove the drain plug from the transfer case.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
