K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Ignition Cable: Service and Repair
Spark Plug Wire Replacement
REMOVAL PROCEDURE
1. Disconnect the spark plug wire at each spark plug.
^
Twist each spark plug 1/2 turn.
^
Pull only on the boot in order to remove the wire from each spark plug.
2. Disconnect the spark plug wire from the ignition coil.
^
Twist each spark plug boot 1/2 turn.
^
Pull only on the boot in order to remove the wires from the ignition coil.
SPARK PLUG WIRE LENGTH V8
Spark Plug Wire Length V8
^
The Melco(R), square design, uses a spark plug wire (1) that is 145 mm (5.70 in) length cable seal to cable seal.
^
The Delphi(R), round design uses a spark plug wire (2) that is 110 mm (4.30 in) length cable seal to cable seal.
