gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5307 > < Initial Inspection and Diagnostic Overview|Page 5305
Page 3
background image

Steps 11-18

The numbers below refer to the step numbers on the diagnostic table.
2. A partial loss of communication in the class 2 serial data circuit uses a different procedure than a total loss of communication of the class 2 serial

data circuit.

4. The following DTCs may be retrieved with a history status. These DTCs are not the cause of the present condition.

^

U1300

^

U1301

^

U1305

6. A State of Health DTC with a history status may be present along with a U1000 or U1255 with a current status. This indicates that the malfunction

occurred when the ignition was on.

10. Normal class 2 serial data communication cannot take place until the power mode master (PMM) module sends the appropriate power mode

Initial Inspection and Diagnostic Overview|Page 5307 > < Initial Inspection and Diagnostic Overview|Page 5305