K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Throttle Position Sensor: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to the Battery Disconnect Caution in Service Precautions.
NOTE: The TP sensor is an electrical component. Do not soak the TP sensor in any liquid cleaner or solvent as damage may result.
IMPORTANT: If the vehicle is equipped with electronic throttle control (ETC) the throttle position (TP) sensor is NOT serviceable. The throttle
body and TP sensor MUST be serviced as a complete assembly.
1. Disconnect the negative battery cable.
2. Remove the generator.
3. Disconnect the throttle position TP sensor electrical connector.
