K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
53. Route the deployment harness out of the vehicle's passenger side.
54. Stretch the 2 driver side harnesses to full length.
55. Stretch the 2 passenger side harnesses to full length.
56. Completely cover the windshield and front door window openings with a drop cloth.
57. Place a power source, 12 V minimum/2 A minimum (i.e., a vehicle battery) near the shorted ends of the passenger side deployment harnesses.
58. Separate the 2 ends of the IP module deployment harness wires.
59. Connect the IP module deployment harness wires to the power source in order to deploy the IP module.
60. Disconnect the IP module deployment harness wires from the power source.
61. Separate the 2 ends of the RF side impact module deployment harness wires.
62. Connect the RF side impact module deployment harness wires to the power source in order to deploy the RF side impact module.
63. Disconnect the RF side impact module deployment harness wires from the power source.
64. Twist together 1 end of each wire of the IP module on the passenger side deployment harness in order to short the wires.
65. Twist together 1 end of each wire of the RF side impact module on the passenger side deployment harness in order to short the wires.
