K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
^
J 39401-B SIR Deployment Fixture
^
An appropriate pigtail adaptor
1. Turn OFF the ignition.
2. Remove the ignition key.
3. Put on safety glasses.
4. Remove the inflator module.
CAUTION: Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.
5. Place the inflator module with the vinyl trim cover facing up and away from the surface on a work bench, floor or deployment fixture.
6. Clear an area on the floor approximately 1.85 m (6 ft) in diameter for deployment of the inflator module. If possible, use a paved, outdoor location
free of activity. Otherwise, use an area free of activity on the shop floor. Make sure you have sufficient ventilation.
7. Make sure no loose or flammable objects are in the area.
8. When deploying a steering wheel module, place the steering wheel module in the center of the cleared area.
9. When deploying an IP module refer to the following instructions: