K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
1. Connect the SIR connector.
2. Connect the connector position assurance (CPA) retainer to the SIR connector.
3. Install the SIR lead wire to the clip on the steering wheel.
IMPORTANT: Verify that the wiring is not exposed or trapped between the inflatable restraint steering wheel module and the steering wheel.
4. Install the SIR lead wire to the clip on the inflator module.
5. Press the inflator module into the steering wheel firmly enough that the module engages and latches the notched pins in the leaf springs.
6. Rotate the steering wheel back into the straight position.
7. Enable the SIR system.
Inflator Module Handling and Scrapping
