gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Impact Sensor > < Inflatable Restraint IP module Disable Switch Indicator|Page 11654
Page 1
background image

Air Bag Deactivation Switch: Service and Repair

INFLATABLE RESTRAINT IP MODULE DISABLE SWITCH REPLACEMENT

REMOVAL PROCEDURE

CAUTION:  Refer to SIR Caution in Service Precautions.

1. Disable the SIR system.
2. Remove the instrument panel trim bezel.
3. Remove the IP module switch from the lower right opening of the switch plate panel.
4. Disconnect the IP module switch electrical connector.

INSTALLATION PROCEDURE

1. Connect the IP module switch electrical connector.
2. Install the IP module switch into the lower right opening of the switch plate panel.
3. Install the instrument panel trim bezel.
4. Enable the SIR system.

Impact Sensor > < Inflatable Restraint IP module Disable Switch Indicator|Page 11654