K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Power Mirror Switch: Service and Repair
Power Folding Outside Mirror Switch Replacement
REMOVAL PROCEDURE
1. Remove the instrument panel (IP) bezel.
2. Release the plastic retaining clips using a flat-bladed tool in order to remove the power folding mirror switch.
3. Disconnect the electrical connectors.
4. Remove the power folding mirror switch from the IP accessory housing.
INSTALLATION PROCEDURE
1. Connect the electrical connectors.
2. Install the power folding mirror switch to the IP accessory housing.
3. Push in the power folding mirror switch until the switch snaps into position.
4. Install the power accessory switch panel.
