K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
5. Clean the area around the CKP sensor before removal in order to avoid debris from entering the engine.
6. Remove the CKP sensor retaining bolt.
7. Remove the CKP sensor.
INSTALLATION PROCEDURE
Crankshaft Position Sensor (CKP)
1. Install the CKP sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the CKP sensor retaining fastener.
Tighten
Tighten the bolt to 25 N.m (18 lb ft).
