K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Negative: Service and Repair
Battery Negative Cable Disconnect/Connect Procedure
Single Battery
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Turn off all the lamps and accessories.
2. Turn the ignition OFF.
3. Remove the battery ground negative cable and bolt from the battery.
INSTALLATION PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions
IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end. Install the battery ground negative cable
and bolt to the battery.
Tighten
Tighten the battery terminal bolt to 17 N.m (13 lb ft).
Auxiliary Battery
REMOVAL PROCEDURE