K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Relay Box: Service and Repair
Relay Replacement (Within an Electrical Center)
TOOLS REQUIRED
J 43244 Relay Puller Pliers
REMOVAL PROCEDURE
1. Remove the electrical center cover.
2. Locate the relay. Refer to Electrical Center Identification Views to locate the electrical center where the relay exists.
IMPORTANT:
^
Always note the orientation of the relay.
^
Make sure the electrical center is secure, as not to put added stress on the wires or terminals.
3. Using the J 43244 (1) position the tool on opposing corners of the relay (2).
NOTE: Use J 43244 to pull the relay straight out from the electrical center terminals. The use of pliers or a flat bladed tool could damage the
electrical center.
4. Remove the relay (2) from the electrical center.
INSTALLATION PROCEDURE
