K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
2. Install the bolt to the frame.
Tighten the bolts to 12 Nm (106 inch lbs.).
3. Install the (RTD) sensor link bracket bolt to the upper control arm.
Tighten the bolt to 9 Nm (80 inch lbs.).
4. Install the wheel speed sensor wire from the Real Time Damping (RTD) sensor bracket.
5. Install the wheel speed sensor wire to the (RTD) sensor bracket.
6. Connect the sensor harness connector to the vehicle harness connector.
7. Remove the safety stands.
8. Lower the vehicle.