K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
5. Remove the outer tie rod end from the relay rod.
6. Inspect the shaft (6) for bent or damaged threads.
7. Clean the tapered surface of the steering knuckle (1).
Installation Procedure
1. Lubricate the tie rod threads with chassis lubricant.
2. Install the tie rod end (4) to the shaft (6).
3. Install the outer tie rod ball stud (3) to the steering knuckle (1).
Notice: Refer to Fastener Notice in Service Precautions.
4. Use the J29193 in order to install the outer tie rod ball stud.
Tighten the J29193 to 54 Nm (40 ft. lbs.) in order to seat the tapers.