K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Case: Service and Repair
Heat Shield Replacement - 4L80-E
Heat Shield Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the two bolts securing the transmission heat shield to the cross member.
3. Remove the transmission heat shield from the cross member.
Installation Procedure
1. Install the transmission heat shield to the cross member.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the two bolts securing the transmission heat shield to the cross member.
^
Tighten the bolts to 17 Nm (13 ft. lbs.).
3. Lower the vehicle.
