K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
1. Coat the new filter seal with automatic transmission fluid.
2. Install the new filter seal into the transmission case. Tap the seal into place using a suitable size socket.
3. Install the new filter into the case.
4. Install the oil pan and a new gasket.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the oil pan bolts.
^
Tighten the oil pan to transmission case bolts alternately and evenly to 11 Nm (97 inch lbs.).
6. If previously removed, install the range selector cable bracket and bolts.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
7. Apply a small amount of sealant GM P/N 12346004 to the threads of the oil pan drain plug, if equipped.
8. Install the oil pan drain plug, if equipped.
^
Tighten the oil pan drain plug to 18 Nm (13 ft. lbs.).
