K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
3.1.
Pull out the tab (1) on the adjuster block side (2) of the automatic transmission shift lock control actuator.
3.2.
Press on the adjuster block (2) to compress the internal adjuster spring, which disengages the adjuster teeth. Slide the adjuster block (2) as
far away from the actuator as possible.
3.3.
Lock the adjuster block (2) in place by pushing in on the tab (1).
4. Inspect the automatic transmission shift lock control actuator for the following items:
4.1.
The automatic transmission shift lock control actuator must lock the shift lever clevis when the shift lever clevis is put into the park position.
4.2.
Depress the brake pedal to move the shift lever out of the park position.
4.3.
The actuator will be energized.
4.4.
Readjust the automatic transmission shift lock control actuator if needed.
5. Install the body control module bracket.
6. Enable the SIR system.
