K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
7. Pull up on the center tabs of the lock button (2).
Important: Do not reuse the existing E-clip. Discard the removed E-clip.
8. Ensure that the steering column shift lever remained in the park position for the best possible access to the E-clip. Remove the E-clip by pulling
radially on the center section of the E-clip.
9. Pull the range selector cable center connector ends apart.
10. Lower the vehicle and ensure that the steering column shift lever is still in the park position.
11. Remove the instrument panel knee bolster.
12. Pull back the carpet and insulation around the driver's area.
