K 1500 Yukon Denali AWD V8-6.0L VIN U (2002)
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the transfer case front speed sensor into the transfer case.
^
Tighten the transfer case front speed sensor to 15 Nm (11 ft. lbs.).
2. Install the transfer case front speed sensor electrical connector.
3. Install the transfer case shield.
4. Lower the vehicle. Refer to Vehicle Lifting.
Transfer Case Speed Sensor Replacement (Right Rear)
Transfer Case Speed Sensor Replacement (Right Rear)
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
