K 1500 Yukon XL 4WD V8-5.3L VIN T (2001)
1. Remove the seat from the vehicle.
2. Remove the armrest.
3. Open the access flaps at the lower rear corners of the seat back in order to allow access to the seat-back-to-frame retaining bolts.
4. Remove the bolts from the seat back frame (6).
5. Remove the seat back frame (6) from the seat back cushion frame (7).
Installation Procedure
1. Install the seat back frame (6) to the seat back cushion frame (7).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts to retain the seat back frame to the seat cushion frame.
Tighten the bolts to retain the seat back frame to the seat cushion frame to 35 N.m (26 lb ft).
3. Secure the access flaps at the lower rear corners of the seat back.
4. Secure the armrest to the seat back. Refer to Rear Seat Armrest Replacement (60/40 - 50/50 Split).
5. Install the seat to the vehicle.
Driver Seat Recliner Handle and Passenger Seat Recliner Handle Replacement
Driver Seat Recliner Handle and Passenger Seat Recliner Handle Replacement
Removal Procedure
